Описание

  • Electronic-Key adapter with PROFINET IO interface
  • read/write system
  • Remote installation
  • Electronic-Key adapter and electronics in one housing
  • Reliable retention of the Electronic-Key, even if there is heavy vibration
  • Transfers the data from the Electronic-Key to a control system for processing
  • Connection to PLC
  • PROFINET protocol, cyclic data transfer to control system
  • Interfacing via GSDML file
  • Various options for address assignment, also using DIP switches
  • Version FSA (For Safety Applications)
Dimension drawing Wiring diagram EKS FSA - Selection of safe operation mode with touch panels up to PL e Dimension drawingWiring diagram Technical dataApprovals Mechanical values and environment
Housing material PA6-GF30 gray
Ambient temperature 0 ... 55 °C
Degree of protection IP67 in installed state (only access side)
Mounting cut-out according to DIN 43700 33 x 68 mm
Installation orientation On the front
PROFINET interface
Connection RJ-45 socket
Electrical connection ratings
LED indicator
Green Operational
Yellow Key in operating distance
Red Fault
PROFINET interface
Connecting cable
Min.2x2 twisted pair copper cable shielded, min. Cat. 5
Star topology wiring
Power supply
Operating voltage DC 20 ... 24 ... 28 V DC
Current consumption max.150 mA
Parameters for the outputs LA and LB
Switching voltage 24 ... 30 V
Switching current 1 ... 10 ... 50 mA With short circuit protection max. 100 times
Utilization category according to EN 60947-5-1
AC-15 24V 50mA
AC-12 24V 50mA
DC-12 24V 50mA
Utilization category according to EN 60947-5-2
DC-13 24V 50mA
Connection cross-section 0,14 ... 1,5 mm? Screw terminal 2x2-pole
Discrepancy time 200 ms Difference time between outputs (LB first)
Interface, bus
PROFINET interface
Data protocol PROFINET
Data rate 10/100 Mbit/s
Data interface Ethernet (IEEE 802.3)
Other
Parameters for the outputs LA and LB
Additional feature
35 Resistance in switched-on state in Ohm
max.1 Capacitive load per output in µF
''